MAXPOLY e2k
Free plans to build "The Jasper" e2k Pylon Racer
Click on the link below to print out the plan. It is in tiled pdf format which means all you need to do is print it on a standard A4 size printer, trim up the sheets and stick them together
Boring Bit - These plans are copyright of Cedar Racing Products. You are welcome to print them for you own personal use or that of your friends colleagues etc. Any use of these plans for commercial gain is not allowed. The finished model is capable of high speeds and its up to the builder and flyer to ensure it is built and operated safely. Put simply if you do anything daft its your fault not ours!!!
Very Important- Please read the following before printing your plans. Not all printers will print a tiled pdf file correctly first off. In order to get the plans printed to the correct size you may need to select a paper size other than A4. "Legal 8 1/2" x 14" seems to work quite well on a variety of printers. There is an explanation of how to change these settings here reply no. 10 if you are unsure. Page 5 of the plan has a measurment grid to allow you to check all is well before you actually cut any wood
Ok on to the plans - Print them HERE - and have fun. Any problems please Email